LOGIN | REGISTER   The Mechanical Design Engineering Portal NOTE: You are not currently logged in, login, or register to assure full site access.   Need to design or evaluate an oring groove?  Here's a great tool.  This program will calculate the percent stretch, squeeze and volume fill for a given geometry that you input below. >ORING GROOVE DESIGNER RADIAL STATIC MALE GLAND APPLICATION INPUTS:       How to use this tool (tips) Bore Dia: Db= +/-.001 +/-.002 +/-.003 +/-.004 +/-.005 +/-.006 +/-.007 +/-.008 +/-.009 +/-.010    Plug Dia: Dp= +/-.001 +/-.002 +/-.003 +/-.004 +/-.005 +/-.006 +/-.007 +/-.008 +/-.009 +/-.010    Groove Dia: Dg= +/-.001 +/-.002 +/-.003 +/-.004 +/-.005 +/-.006 +/-.007 +/-.008 +/-.009 +/-.010    Groove Width: Wg= +/-.001 +/-.002 +/-.003 +/-.004 +/-.005 +/-.006 +/-.007 +/-.008 +/-.009 +/-.010    Oring Inside Dia: IDo= +/-.001 +/-.002 +/-.003 +/-.004 +/-.005 +/-.006 +/-.007 +/-.008 +/-.009 +/-.010 +/-.011 +/-.012 +/-.013 +/-.014 +/-.015 +/-.016 +/-.017 +/-.018 +/-.019 +/-.020 +/-.021 +/-.022 +/-.023 +/-.024 +/-.025 +/-.026 +/-.027 +/-.028 +/-.029 +/-.030 +/-.031 +/-.032 +/-.033 +/-.034 +/-.035 +/-.036 +/-.037 +/-.038 +/-.039+/-.040 +/-.045 +/-.050 +/-.055 +/-.060 +/-.065 +/-.070 +/-.075 +/-.080 +/-.085 +/-.090 +/-.095 +/-.100 +/-.105 +/-.110 +/-.115 +/-.120 +/-.125 +/-.140 +/-.155 +/-.170    Oring Cross Section: CSo= +/-.001 +/-.002 +/-.003 +/-.004 +/-.005 +/-.006 +/-.007 +/-.008 +/-.009 +/-.010  Get standard oring size and tolerance data here.     Backups 0       1   2    • my.iCrank - my Design Tool Links You can add your own Design Tool related links to this page. You must be registered and logged in to use this feature.   E-mail us | Advertise here | About this site | cool iCrank gear | iCrank Book Selection my.iCrank | Privacy statement | Disclaimer Copyright © 1999-2010 iCrank.com All Rights Reserved. You may not duplicate or redistribute in any form without prior written consent.